Every category below lists the gauges, sizes, and lengths we stock. Don't see the exact spec you need? Check the box on the quote form anyway and add a note — most sizes can be sourced or cut to order.
Square Tubing
Structural square tube stocked in full-length 24 ft bars, available red-oxide primed or hot-dip galvanized.
| Sizes | 1/2″ to 4″ |
| Length | 24 ft |
| Gauges | 16GA, 14GA, 11GA, 3/16″, 1/4″ |
| Finish | Red-oxide primed or galvanized |
Rectangular Steel Tubing
Red-oxide primed rectangular tube, stocked in full-length 24 ft bars for framing and fabrication. no dedicated stock photo of this size range yet
| Sizes | 2″x1″, 4″x2″, 6″x2″ |
| Length | 24 ft |
| Finish | Red-oxide primed |
Z-Purlin
Roll-formed Z-section for roof and wall framing on metal buildings. profile diagram + framing-use photos shown
| Gauge | 14GA |
| Use | Roof / wall framing |
C-Purlin
C-section purlin for metal building frames, in red-oxide or galvanized finish.
| Sizes | 4x2, 6x2, 8x2 |
| Length | 20, 25, 30 ft |
| Gauges | 16GA, 14GA |
| Finish | Red-oxide or galvanized |
Open-Face C-Channel
Light-gauge open-face channel for framing and general fabrication.
| Gauge | 14GA |
C-Channel
Heavier structural channel, 20 ft lengths, for framing and general construction.
| Sizes | 3″x2″, 4″x2″ |
| Gauge | 3/16″ |
| Length | 20 ft |
Angle Iron
L-shaped structural angle for framing, brackets, and general fabrication.
| Sizes | 3/4″ to 4″ |
| Gauges | 11GA, 3/16″, 1/4″ |
Flat Bar
General-purpose flat bar stock for fabrication, brackets, and repair work.
| Sizes | 1/2″ to 4″ |
| Gauges | 11GA, 3/16″, 1/4″ |
GI R-Panel / U-Panel / AG-Panel
Roll-formed galvanized roofing and wall panels in the standard ribbed profiles used for metal buildings.
| Profiles | R-Panel, U-Panel, AG-Panel |
| Material | Galvanized (G.I.) |
Smooth Plate
Flat steel sheet in standard 4x8 panels, from thin-gauge sheet to 1/4″ plate.
| Sheet Size | 4 ft x 8 ft |
| Gauges | 16GA, 14GA, 1/8″, 3/16″, 1/4″ |
Floor / Diamond Plate
Raised diamond-tread plate for flooring, ramps, truck beds, and walkways.
| Sheet Size | 4 ft x 8 ft |
| Gauges | 1/8″, 3/16″, 1/4″ |
Expanded Metal
Diamond-mesh expanded metal sheet for guards, walkways, fencing infill, and ventilated panels.
| Sheet Size | 4 ft x 8 ft |
| Openings | 3/4″, 1/2″x1/8″ |
Gate & Fencing Accessories
Steel gates, posts, hinges, latches, and other fencing hardware — stocked in a range of standard sizes.
| Options | Multiple sizes available |